Post by BOYLI 1 on Oct 6, 2009 12:48:39 GMT 8
This Page was taken from a post of Skipperooo in FAS Tech Forum.
Welcome to FAS [Tech n' Maint Forum] Posted here are collection of technical information from previous forum threads (FAS/AGL) and general facts from experienced veteran gunsmiths and players: Thank you!
SPRINGS: (Approx. Settled Spring FPS on .20gBB)
Stock Gun (brand new gun) = 270-290 FPS
CQB Gun: M100 / SP100 / PDI120% = 330-350 FPS << FAP CQB Standard
Standard Field Gun: M120 / SP120 / PDI170% = 390-410 FPS [.20gBB stable] << COMMON UPGRADE
Std High Field Gun 1: M130 / SP130 / PDI190% / PDI210% = 440-460 FPS [.20gBBmin .23gBB stable]
Std High Field Gun 2: M140 / SP140 / PDI240% = 470-490 FPS [.23gBBmin .25gBB stable]
Sniper Field Gun 1: M150 / SP150 / PDI270% = 510-530FPS [.28gBB stable] << FAP Sniper Standard
Sniper Field Gun 2: M160 / SP160 = 550-580FPS [.30g/.36gBB sweet-stable] << rat buster
Sniper Field Gun 3: M170 / SP170 = 580-600+ FPS [.36g/.43gBB sweet-stable] << cat buster
BB goes wild = BB too light -- BB range seems near = BB too heavy
GEARS: (Does NOT affect Gun FPS, only ROF)
Infinite=(1) Ultra=(2) SuperTorqueUp=(3) TorqueUp=(4) StockRatio=(5) FastGear=(6)
>> Numbers indicate "car-gear-shift". *Small batts (non Sub-C) DOWNSHIFT to next LOWER gear. <<
Common Gear-to-Spring Setup for Big Batt (engine) (Sub-C):
Fast Gears (6) - UP TO M100 / SP100 / PDI120%
Stock Gears (5) can 'safely' handle up to M130, SP130, PDI190% <<<< on 9.6v 1700mAh(min)
Torque Up Gears (4) - M130 / SP130 / PDI190%-210% or LOWER
Torque Up Gears OR Super Torque Up (4/3) - M140 / SP140 / PDI240%
Ultra Torque Up Gears (2) - M150 / SP150 / PDI270%
Ultra or Infinite Gears (2/1) - M160 / SP160 << Needs minor machining to fit on Ver.2 GearBox
Infinite Torque Up Gears (1) - M170 / SP170 << Needs minor machining to fit on Ver.2 GearBox
*Some Gear set won't fit on some reinforced Gearbox-CHECK first before you get one.
*No known machining on stock ver.3 GearBox to fit any gear set.
*AVOID using Bearing Bushings on M120 above. only for soft springs
M130 / SP130 / PDI190%-PDI210% on STOCK Gears will last Approx. 5-10 months (depends on use)
Stock Gears - Low Cost, nice ROF. will not last long. (cast alloy)
Flat Gears - Noisier, Cheaper. More durable (steel)
Helical Gears - Silent. Expensive. shimming sensitive (steel)
Welcome to FAS [Tech n' Maint Forum] Posted here are collection of technical information from previous forum threads (FAS/AGL) and general facts from experienced veteran gunsmiths and players: Thank you!
SPRINGS: (Approx. Settled Spring FPS on .20gBB)
Stock Gun (brand new gun) = 270-290 FPS
CQB Gun: M100 / SP100 / PDI120% = 330-350 FPS << FAP CQB Standard
Standard Field Gun: M120 / SP120 / PDI170% = 390-410 FPS [.20gBB stable] << COMMON UPGRADE
Std High Field Gun 1: M130 / SP130 / PDI190% / PDI210% = 440-460 FPS [.20gBBmin .23gBB stable]
Std High Field Gun 2: M140 / SP140 / PDI240% = 470-490 FPS [.23gBBmin .25gBB stable]
Sniper Field Gun 1: M150 / SP150 / PDI270% = 510-530FPS [.28gBB stable] << FAP Sniper Standard
Sniper Field Gun 2: M160 / SP160 = 550-580FPS [.30g/.36gBB sweet-stable] << rat buster
Sniper Field Gun 3: M170 / SP170 = 580-600+ FPS [.36g/.43gBB sweet-stable] << cat buster
BB goes wild = BB too light -- BB range seems near = BB too heavy
GEARS: (Does NOT affect Gun FPS, only ROF)
Infinite=(1) Ultra=(2) SuperTorqueUp=(3) TorqueUp=(4) StockRatio=(5) FastGear=(6)
>> Numbers indicate "car-gear-shift". *Small batts (non Sub-C) DOWNSHIFT to next LOWER gear. <<
Common Gear-to-Spring Setup for Big Batt (engine) (Sub-C):
Fast Gears (6) - UP TO M100 / SP100 / PDI120%
Stock Gears (5) can 'safely' handle up to M130, SP130, PDI190% <<<< on 9.6v 1700mAh(min)
Torque Up Gears (4) - M130 / SP130 / PDI190%-210% or LOWER
Torque Up Gears OR Super Torque Up (4/3) - M140 / SP140 / PDI240%
Ultra Torque Up Gears (2) - M150 / SP150 / PDI270%
Ultra or Infinite Gears (2/1) - M160 / SP160 << Needs minor machining to fit on Ver.2 GearBox
Infinite Torque Up Gears (1) - M170 / SP170 << Needs minor machining to fit on Ver.2 GearBox
*Some Gear set won't fit on some reinforced Gearbox-CHECK first before you get one.
*No known machining on stock ver.3 GearBox to fit any gear set.
*AVOID using Bearing Bushings on M120 above. only for soft springs
M130 / SP130 / PDI190%-PDI210% on STOCK Gears will last Approx. 5-10 months (depends on use)
Stock Gears - Low Cost, nice ROF. will not last long. (cast alloy)
Flat Gears - Noisier, Cheaper. More durable (steel)
Helical Gears - Silent. Expensive. shimming sensitive (steel)